USED MACHINES AND EQUIPMENT FOR STEEL INDUSTRY

METAL WORKING MACHINES

GFM SX-16 CNC Radial Forging

Manufacturer: GFM

Manufacturer:    GFM (Austria)

Model: SX-16

YOM:   1974 / 2021

PLC:  Siemens S7 - Technology v4.2 with CNC Bosch Rexroth XM21

Numbers of Hammers:     4

Forging force:      800 Ton (200 t per Hammer)

Strokes per minute:      580

Hammer length:        320 mm

Maximum setting range is calculated diameter hammers – 100 mm

Maximum diameter of forging for structural steel:

 circular cross section – Ø 160 mm

             square cross section – 130 mm

Extreme quadrangle:          12 x 120 mm

Maximum length of forging:         6000 mm

Maximum diameter mounting the manipulator:   160 mm

Feed of manipulator A:    6800 mm

Feed of manipulator B:           7200 mm

Manipulators speed in fast moving: 400 mm/s

Feed speed of manipulators (steeples regulation):   10 ÷ 115 mm/s

Cooling water pressure:          3 ÷ 5 bar

Temperature of inlet water:          max. 30?C

Cooling water consumption:            34m3/h

Pipe diameter for cooling water:         2”

Compressed air pressure:                  min. 5 bar

Pipe diameter for compressed air:   Ø 20 mm

Consumption of compressed air:         1,5 Nm3/h

Power supply (nominal power):         350 kW

Motor voltage:           500 V

Control voltage        220 V

Main engine Power:         200 kW

Power pump motors:          185 kW

Power manipulators motors:        2 x 22 kW

 

Dimensions of the machine:

Axis height of forging above the hall level:           750 mm

Maximum height of machine above the hall level:         2.050 mm

Maximum length of machine at the hall level:                  33.740 mm

Foundation length:    34.200 mm

 

TO SEE VIDEO THE LINK:  https://www.youtube.com/watch?v=IbOxCubJ4M8

GFM SX-16 CNC Radial Forging- Full retrofitted 2021

Ask about product
Captcha